AccuSystems Corporation -- FAQ's

Pocket Guide to Excellent V-Scoring
FAQ (9)

Conclusion

Far and away the biggest issues associated with v-scored product are panel strength and difficult board separation after assembly. Working with your customers to provide an easily de-paneled product will undoubtedly give you a measurable advantage over your competition. We hope that the charts and recommendations we have supplied here will help you in your quest to identify proper web thicknesses. We also hope that this approach will encourage you to question specifications, be creative, and maybe head off some potential problems at the pass.

The Dreaded Disclaimer

We have tried to get you to see a process overview. Hopefully this perspective will encourage a commonsense approach to this versatile process. All the charts and example are recommendations only, and are based on standard .062" thick, FR-4 material with a 30 degree cutter angle, and our experience (your specific equipment and tools may vary and, in all ways, always follow all safety guidelines). They will cover 90% of the projects on which you will work. The other 10% will include special projects, surface mount features close to the score line, CEM (which typically requires a much thicker web than FR-4) and other materials.

Work Done by:

Phil Altomare, Jr. -- AccuSystems Corporation

Mark Simmons -- V-Score Central

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or
registered trademarks of their respective companies or mark holders.

FAQ's Index

Index Introduction How Deep? Web Thickness Guidelines
How Wide? What Tolerances Can Be Held? Some Finer Points
Jump Scoring "Break-Through" Conclusion